IOTA Balance Finder Tool


Author
Message
Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
bstolman - 17 Jan 2018
When it says checking new addresses what is that indicating?

@bstolman
It's generating addresses in your seed going from index 0 down to 30 (I think it checks the first 30)
Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
1machec - 18 Jan 2018
1machec - 28 Nov 2017
Winston - 20 Nov 2017
1machec - 20 Nov 2017
Hi Winston, still no luck. Just to make sure.
'Run the following commands in Terminal or PowerShell:
Is this the Node.js command prompt field?
Its still telling me my seed is not 81 characters
This is the seed I'm entering into the IOTA Light Wallet 2.5.4 - IRI 1.4.1.2
Any ideas?
Thank you
Matthew

@1machec I'm not sure then. If the balance finder tool is being this uncooperative for you, I would recommend just manually generating addresses with the wallet, and then comparing each address to the snapshot.

Note that if you've already generated a bunch of addresses and your balance hasn't come back, that means that you'll just need to do the reclaim process anyway. There's really no point in doing this balance finder tool or even manually checking addresses in the snapshot since you know you'll be reclaiming regardless.

So my best advice is to just complete both phases of the reclaim and then wait for the IOTA Foundation to start processing claims

Hi Winston, when will IOTA start processing claims? Just curious because its a lot of IOTA. Thank yo

Greetings, is there any news regarding when IOTA will begin processing claims? Thank yo

@1machec
Thanks for checking in. The Foundation has already completed processing of all reclaims that were done before December 24th, and we're still awaiting news of how they'll proceed with the next round of reclaims. You can keep up with that news via the pinned "Reclaim Status" thread in the General Discussion forum
Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
RedBaron - 18 Jan 2018
Hello Winston,

Thank you for your job helping people out.
I have a question too, after I Launched the reclaim process, I got a transaction ID.
When looking into IOTASear.ch, it is still unconfirmed.
When the claim will be processed, will it change to confirmed status?

Regards



@RedBaron
Thanks for checking in. The IOTA Foundation has yet to release any information pertaining to the next batch of reclaims, so we're still waiting for that news. The standard recommendation is to go ahead and re-do the reclaim process (taking care to make sure to get the final few steps of the process 'confirmed'), and then wait for word from the Foundation.

Follow this information via the "Reclaim Status" thread that's pinned in the General Discussion forum
kraut
k
Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)
Group: Forum Members
Posts: 15, Visits: 313
Hello,

on step two "npm install" comes this errors:

npm ERR! Linux 4.4.0-109-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code EAI_AGAIN
npm ERR! errno EAI_AGAIN
npm ERR! syscall getaddrinfo

npm ERR! getaddrinfo EAI_AGAIN registry.npmjs.org:443

Gabo
G
Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)
Group: Forum Members
Posts: 3, Visits: 0
Hi Winston,
My balance is still 0 as of now and I don't know how to get it back. At the end of october I used the reclaim tool, generated a new seed and the transaction hash was confirmed. When I'm searching for this transaction hash on thetangle.org it says nothing is found: 
MAGKCFMVJPZ9PTUGL9HDDMHBPNEGDZPGVREZAWNDCNNMDTKI9GXSYDJWFDKTTDBMKIKGROJ9EZXH99999

The only address I have is a very old one on which bitfinex transfered my Iota's in june. And even this address can not be found on thetangle.org: UPV/MXDZCX/VTDMUJ/CWIKWY/ESIGSI/MFODLA/JPIJTP/FXLSL9YOW/AHNQZG/CMOLRL/GXXYZY/EAUQMD/PCYCX9IYO/ZYMZZY9RL
Sending the tokens from bitfinex to my wallet was the only transaction I've done. Thus I only have this unknown address.

How can I check if the reclaim process is done? What can I do to get the balance back?

Thank you very much for your help.
Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
Gabo - 21 Jan 2018
Hi Winston,
My balance is still 0 as of now and I don't know how to get it back. At the end of october I used the reclaim tool, generated a new seed and the transaction hash was confirmed. When I'm searching for this transaction hash on thetangle.org it says nothing is found: 
MAGKCFMVJPZ9PTUGL9HDDMHBPNEGDZPGVREZAWNDCNNMDTKI9GXSYDJWFDKTTDBMKIKGROJ9EZXH99999

The only address I have is a very old one on which bitfinex transfered my Iota's in june. And even this address can not be found on thetangle.org: UPV/MXDZCX/VTDMUJ/CWIKWY/ESIGSI/MFODLA/JPIJTP/FXLSL9YOW/AHNQZG/CMOLRL/GXXYZY/EAUQMD/PCYCX9IYO/ZYMZZY9RL
Sending the tokens from bitfinex to my wallet was the only transaction I've done. Thus I only have this unknown address.

How can I check if the reclaim process is done? What can I do to get the balance back?

Thank you very much for your help.

@Gabo
Thanks for the post, and welcome to the community.

The standard advice right now is to re-do the reclaim process while taking care to get those last 2 steps of the process confirmed. After you do that, then it's just a waiting game (again) until the IOTA Foundation is able to start processing batch number two of reclaims.

It's not essential for you to figure out which exact addresses hold your balance, because that doesn't change anything in practice. You'll still need to reclaim again, so you might as well do that now
asisam
a
Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)Attaching to Tangle (10 reputation)
Group: Forum Members
Posts: 3, Visits: 0
https://thetangle.org/transaction/TQLUJSJBEWDAJFZOYRWJHAYYVHL9XSBVYGSNGTIGMQZIGITGAYRXTLRAYVPXYZHLWCGGCCKPRXKK99999
Hi,
my 1.0 Gi The address my IOTAs sent to: YWYYOXSTN99BUCQGXLITLSABX9QUCWSCTZEVCKSDJLTGLHZIHGPGLEVWUAQIZUUURHZFQBZJYBWDJABDCX9CG9OWNB
Help!

Transaction
TQLUJSJBEWDAJFZOYRWJHAYYVHL9XSBVYGSNGTIGMQZIGITGAYRXTLRAYVPXYZHLWCGGCCKPRXKK99999 copied
January 20, 2018 08:08:38 - 2 days and 4 hours ago
Value
1 Gi
Conversion
2.729,049 USD
Tag
B99999999999999999999999999
Confirmed
Index in bundle
0 / 8
Weight magnitude
15
Address
YWYYOXSTN99BUCQGXLITLSABX9QUCWSCTZEVCKSDJLTGLHZIHGPGLEVWUAQIZUUURHZFQBZJYBWDJABDCX9CG9OWNB
Bundle
NEUQN9XGBWIDWDRZFBVVWEXLHXDZJQGXLD9EJRDKTEYDLWOFOVOZUIPUTHGVCZQKF9AJAJTCDAYRSZ9LD
Nonce
YXQTLQPTUENYFLYARSUZQPJOWXZ
Signature/Message
999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
Parent transactions
Trunk
OJOTHLCWFOZX9BPTLEDHPEUXMTTWSFPODMODCJPGCYUMATTZEZHOXWITTNQNRWIECKWSK9PUOUUKA9999
Branch
VZGW9VWQPJLOYESUIIOVXTS9JSCSPKEKOR9UHSGUMIAKK9EQBURWFGGIVBOTLMXWVDFKLUXZGKN999999
Children transactions 5
CDRTWCPIUO9PWLTNXHYLLR9HVVQRSRLLGDOTFGTSMRQFEPEGZKOPPEXJRDESJB9DCYDDUNHLPANX99999
XLXZYZVNMVLKLPSSAEOPMBWWSCLXKT9HZLWIHMFSIIXWQJASXXB9WBOMYENPHLQYFYBXUCKRMVW9A9999
IVBQPNMFXLQLMTNMAYJOSLJFZZXOLYRBITASIZJGBZIIDBBIMHDQDIAUQW9PUWDAVVFLFIEQSISBA9999
TWTOALOBJWGGVTJCDGBDZTIJGFRLWJOYPSQXPFXNUCWL9OCYRRXSXLN9QIJUBPRZQPJUYWZGWPOGZ9999
UMMDUGUNQ9D9TS9J9MTIFURLBKSZOANRH9CMQSXVF9OSKHGKUXVLQWWKZBXXBSEXTUYJHCW9QVQJZ9999
Gabo
G
Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)Attaching to Tangle (6 reputation)
Group: Forum Members
Posts: 3, Visits: 0
Winston - 21 Jan 2018
Gabo - 21 Jan 2018
Hi Winston,
My balance is still 0 as of now and I don't know how to get it back. At the end of october I used the reclaim tool, generated a new seed and the transaction hash was confirmed. When I'm searching for this transaction hash on thetangle.org it says nothing is found: 
MAGKCFMVJPZ9PTUGL9HDDMHBPNEGDZPGVREZAWNDCNNMDTKI9GXSYDJWFDKTTDBMKIKGROJ9EZXH99999

The only address I have is a very old one on which bitfinex transfered my Iota's in june. And even this address can not be found on thetangle.org: UPV/MXDZCX/VTDMUJ/CWIKWY/ESIGSI/MFODLA/JPIJTP/FXLSL9YOW/AHNQZG/CMOLRL/GXXYZY/EAUQMD/PCYCX9IYO/ZYMZZY9RL
Sending the tokens from bitfinex to my wallet was the only transaction I've done. Thus I only have this unknown address.

How can I check if the reclaim process is done? What can I do to get the balance back?

Thank you very much for your help.

@Gabo
Thanks for the post, and welcome to the community.

The standard advice right now is to re-do the reclaim process while taking care to get those last 2 steps of the process confirmed. After you do that, then it's just a waiting game (again) until the IOTA Foundation is able to start processing batch number two of reclaims.

It's not essential for you to figure out which exact addresses hold your balance, because that doesn't change anything in practice. You'll still need to reclaim again, so you might as well do that now

Thank you for the reply. When I reclaim again which seed do I have to use? The new one created during the first reclaim? Or the old one where the balance had appeared the last time?

kraut
k
Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)Attached to Tangle (404 reputation)
Group: Forum Members
Posts: 15, Visits: 313
kraut - 20 Jan 2018
Hello,

on step two "npm install" comes this errors:

npm ERR! Linux 4.4.0-109-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code EAI_AGAIN
npm ERR! errno EAI_AGAIN
npm ERR! syscall getaddrinfo

npm ERR! getaddrinfo EAI_AGAIN registry.npmjs.org:443

The Finder works now. I`ve reinstalled npm and restart the system. For me worked only nodejs main.js instead of node main.js.


Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
Gabo - 22 Jan 2018
Winston - 21 Jan 2018
Gabo - 21 Jan 2018
Hi Winston,
My balance is still 0 as of now and I don't know how to get it back. At the end of october I used the reclaim tool, generated a new seed and the transaction hash was confirmed. When I'm searching for this transaction hash on thetangle.org it says nothing is found: 
MAGKCFMVJPZ9PTUGL9HDDMHBPNEGDZPGVREZAWNDCNNMDTKI9GXSYDJWFDKTTDBMKIKGROJ9EZXH99999

The only address I have is a very old one on which bitfinex transfered my Iota's in june. And even this address can not be found on thetangle.org: UPV/MXDZCX/VTDMUJ/CWIKWY/ESIGSI/MFODLA/JPIJTP/FXLSL9YOW/AHNQZG/CMOLRL/GXXYZY/EAUQMD/PCYCX9IYO/ZYMZZY9RL
Sending the tokens from bitfinex to my wallet was the only transaction I've done. Thus I only have this unknown address.

How can I check if the reclaim process is done? What can I do to get the balance back?

Thank you very much for your help.

@Gabo
Thanks for the post, and welcome to the community.

The standard advice right now is to re-do the reclaim process while taking care to get those last 2 steps of the process confirmed. After you do that, then it's just a waiting game (again) until the IOTA Foundation is able to start processing batch number two of reclaims.

It's not essential for you to figure out which exact addresses hold your balance, because that doesn't change anything in practice. You'll still need to reclaim again, so you might as well do that now

Thank you for the reply. When I reclaim again which seed do I have to use? The new one created during the first reclaim? Or the old one where the balance had appeared the last time?

@Gabo
Good question. The Reclaim Tool in the wallet actually provides pretty solid on-screen instructions, so you'll be in good shape if you follow those. But the answer to your question is, "both". The Tool will want both your old seed and your new seed, but everything is well demarcated, so you'll know exactly where to put each bit of information.

elatif
e
Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)
Group: Forum Members
Posts: 9, Visits: 0
Hi,
what does this line means when I'm running the balance finder - -bash: syntax error near unexpected token `newline'
Thanks
elatif
e
Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)Attaching to Tangle (54 reputation)
Group: Forum Members
Posts: 9, Visits: 0
got it 
thanks 
piewies
p
Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)
Group: Forum Members
Posts: 12, Visits: 0
Hi all! I am trying to find out if I maybe used another seed when I send my 1 GIOTA to the adress

Therefor I use the recursive balance finder tool.

I did the coding as It told me but something went wrong. I think I made an error on the way but this is all Chinese to me. Hope anyone can help me out!

Windows PowerShell
Copyright (C) 2014 Microsoft Corporation. All rights reserved.

PS C:\Users\s12345> git clone --recursive https://github.com/rajivshah3/IOTA-Balance-Finder balance-finder
Cloning into 'balance-finder'...
remote: Counting objects: 149, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 149 (delta 7), reused 13 (delta 5), pack-reused 131
Receiving objects: 100% (149/149), 19.63 MiB | 4.91 MiB/s, done.
Resolving deltas: 100% (81/81), done.
Submodule 'pre-trans-generator' (https://github.com/domschiener/iota-address-generator) registered for path 'pre-trans-g
enerator'
Cloning into 'C:/Users/s12345/balance-finder/pre-trans-generator'...
remote: Counting objects: 14, done.
remote: Total 14 (delta 0), reused 0 (delta 0), pack-reused 14
Submodule path 'pre-trans-generator': checked out '097e0de53e8eab426fd351f8d92a6397765f1d3e'
PS C:\Users\s12345>
PS C:\Users\s12345> cd balance-finder
PS C:\Users\s12345\balance-finder> npm install
npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN IOTA-Balance-Finder@1.1.0 No repository field.

added 6 packages in 1.073s
PS C:\Users\s12345\balance-finder> node main.js MYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMOLDSEED p
Address Search Type: Regular
Checking your balance...Press i at any time to stop...
Checking for new addresses
C:\Users\s12345\balance-finder\main.js:79
for (var i = 0; i < d.length; i++) {
   ^

TypeError: Cannot read property 'length' of undefined
at getNewAddressCallback (C:\Users\s12345\balance-finder\main.js:79:25)
at C:\Users\s12345\balance-finder\main.js:184:5
at api.getNewAddress (C:\Users\s12345\balance-finder\node_modules\iota.lib.js\lib\api\api.js:799:16)
at check (C:\Users\s12345\balance-finder\main.js:179:20)
at Object.<anonymous> (C:\Users\s12345\balance-finder\main.js:188:1)
at Module._compile (module.js:643:30)
at Object.Module._extensions..js (module.js:654:10)
at Module.load (module.js:556:32)
at tryModuleLoad (module.js:499:12)
at Function.Module._load (module.js:491:3)
PS C:\Users\s12345\balance-finder>
VALLEYBOY
VALLEYBOY
Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)Attaching to Tangle (45 reputation)
Group: Forum Members
Posts: 5, Visits: 4
DOES ANYONE HAVE THE NEW NODES LINK (the ones in the light wallet do not work)
piewies
p
Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)Attaching to Tangle (36 reputation)
Group: Forum Members
Posts: 12, Visits: 0
Hi @rajivshah, First of all thank you for making this tool! On advice of @Winston I am trying to find out if I maybe used the wrong seed when I sended my 1 GIOTA to the adress

Therefor I tried using the recursive balance finder tool. I did the coding as told on the github page. But somehow I made an error. Hope you can help me with this! Underneath I pasted the coding in Powershell 


Windows PowerShell
Copyright (C) 2014 Microsoft Corporation. All rights reserved.

PS C:\Users\s12345> git clone --recursive https://github.com/rajivshah3/IOTA-Balance-Finder balance-finder
Cloning into 'balance-finder'...
remote: Counting objects: 149, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 149 (delta 7), reused 13 (delta 5), pack-reused 131
Receiving objects: 100% (149/149), 19.63 MiB | 4.91 MiB/s, done.
Resolving deltas: 100% (81/81), done.
Submodule 'pre-trans-generator' (https://github.com/domschiener/iota-address-generator) registered for path 'pre-trans-g
enerator'
Cloning into 'C:/Users/s12345/balance-finder/pre-trans-generator'...
remote: Counting objects: 14, done.
remote: Total 14 (delta 0), reused 0 (delta 0), pack-reused 14
Submodule path 'pre-trans-generator': checked out '097e0de53e8eab426fd351f8d92a6397765f1d3e'
PS C:\Users\s12345>
PS C:\Users\s12345> cd balance-finder
PS C:\Users\s12345\balance-finder> npm install
npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN IOTA-Balance-Finder@1.1.0 No repository field.

added 6 packages in 1.073s
PS C:\Users\s12345\balance-finder> node main.js MYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMYOLDSEEDMOLDSEED p
Address Search Type: Regular
Checking your balance...Press i at any time to stop...
Checking for new addresses
C:\Users\s12345\balance-finder\main.js:79
for (var i = 0; i < d.length; i++) {
 ^

TypeError: Cannot read property 'length' of undefined
at getNewAddressCallback (C:\Users\s12345\balance-finder\main.js:79:25)
at C:\Users\s12345\balance-finder\main.js:184:5
at api.getNewAddress (C:\Users\s12345\balance-finder\node_modules\iota.lib.js\lib\api\api.js:799:16)
at check (C:\Users\s12345\balance-finder\main.js:179:20)
at Object.<anonymous> (C:\Users\s12345\balance-finder\main.js:188:1)
at Module._compile (module.js:643:30)
at Object.Module._extensions..js (module.js:654:10)
at Module.load (module.js:556:32)
at tryModuleLoad (module.js:499:12)
at Function.Module._load (module.js:491:3)
PS C:\Users\s12345\balance-finder>
Rajiv Shah
R
Attached to Tangle (327 reputation)
Group: Moderators
Posts: 14, Visits: 0
@piewies hi! If you run
git checkout add9ae25916048785198859cbf06d559cbadcd15
and then 
npm install

node main.js SEED p


It should work. The pre-transitioned address generation is supported in a previous commit but I removed it in the latest one
Edited 2 Years Ago by Rajiv Shah
magsrevs
m
Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)Attaching to Tangle (34 reputation)
Group: Forum Members
Posts: 9, Visits: 0
Rajiv Shah - 21 Feb 2018
@piewies hi! If you run
git checkout add9ae25916048785198859cbf06d559cbadcd15
and then 
npm install

node main.js SEED p


It should work. The pre-transitioned address generation is supported in a previous commit but I removed it in the latest one

Hi Rajiv,

I'm trying to get the balance finder tool to work. I've tried a few versions - I need to track down an address from before October - including the checkout you recommend above, but I keep coming up against this error:

Address Search Type: Pre-Transitioned
Checking your balance...Press i at any time to stop...
Checking for new addresses
/Users/xxxx/IOTA-Balance-Finder/main.js:51
for (var i = 0; i < d.length; i++) {
        ^

TypeError: Cannot read property 'length' of undefined
  at getNewAddressCallback (/Users/xxxx/IOTA-Balance-Finder/main.js:51:25)
  at /Users/xxxx/IOTA-Balance-Finder/main.js:129:7
  at m.getNewAddress (./pre-trans-generator/js/iota.js:1:6034)
  at check (/Users/xxxx/IOTA-Balance-Finder/main.js:124:25)
  at Object.<anonymous> (/Users/xxxx/IOTA-Balance-Finder/main.js:134:1)
  at Module._compile (module.js:662:30)
  at Object.Module._extensions..js (module.js:673:10)
  at Module.load (module.js:575:32)
  at tryModuleLoad (module.js:515:12)
  at Function.Module._load (module.js:507:3)


Any ideas what might be causing this problem? I'm a bit stumped to be honest! Obviously "d" is undefined thus has no length, but I'm not sure what it is supposed to be... 
Thanks for your help.
xprmnt92
x
Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)
Group: Forum Members
Posts: 14, Visits: 35
magsrevs - 27 Feb 2018
Rajiv Shah - 21 Feb 2018
@piewies hi! If you run
git checkout add9ae25916048785198859cbf06d559cbadcd15
and then 
npm install

node main.js SEED p


It should work. The pre-transitioned address generation is supported in a previous commit but I removed it in the latest one

Hi Rajiv,

I'm trying to get the balance finder tool to work. I've tried a few versions - I need to track down an address from before October - including the checkout you recommend above, but I keep coming up against this error:

Address Search Type: Pre-Transitioned
Checking your balance...Press i at any time to stop...
Checking for new addresses
/Users/xxxx/IOTA-Balance-Finder/main.js:51
for (var i = 0; i < d.length; i++) {
        ^

TypeError: Cannot read property 'length' of undefined
  at getNewAddressCallback (/Users/xxxx/IOTA-Balance-Finder/main.js:51:25)
  at /Users/xxxx/IOTA-Balance-Finder/main.js:129:7
  at m.getNewAddress (./pre-trans-generator/js/iota.js:1:6034)
  at check (/Users/xxxx/IOTA-Balance-Finder/main.js:124:25)
  at Object.<anonymous> (/Users/xxxx/IOTA-Balance-Finder/main.js:134:1)
  at Module._compile (module.js:662:30)
  at Object.Module._extensions..js (module.js:673:10)
  at Module.load (module.js:575:32)
  at tryModuleLoad (module.js:515:12)
  at Function.Module._load (module.js:507:3)


Any ideas what might be causing this problem? I'm a bit stumped to be honest! Obviously "d" is undefined thus has no length, but I'm not sure what it is supposed to be... 
Thanks for your help.

Im waiting for the same answer bro, i got the same situation over here and i hope it would be solved soon. 
xprmnt92
x
Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)Attaching to Tangle (67 reputation)
Group: Forum Members
Posts: 14, Visits: 35
xprmnt92 - 1 Mar 2018
magsrevs - 27 Feb 2018
Rajiv Shah - 21 Feb 2018
@piewies hi! If you run
git checkout add9ae25916048785198859cbf06d559cbadcd15
and then 
npm install

node main.js SEED p


It should work. The pre-transitioned address generation is supported in a previous commit but I removed it in the latest one

Hi Rajiv,

I'm trying to get the balance finder tool to work. I've tried a few versions - I need to track down an address from before October - including the checkout you recommend above, but I keep coming up against this error:

Address Search Type: Pre-Transitioned
Checking your balance...Press i at any time to stop...
Checking for new addresses
/Users/xxxx/IOTA-Balance-Finder/main.js:51
for (var i = 0; i < d.length; i++) {
        ^

TypeError: Cannot read property 'length' of undefined
  at getNewAddressCallback (/Users/xxxx/IOTA-Balance-Finder/main.js:51:25)
  at /Users/xxxx/IOTA-Balance-Finder/main.js:129:7
  at m.getNewAddress (./pre-trans-generator/js/iota.js:1:6034)
  at check (/Users/xxxx/IOTA-Balance-Finder/main.js:124:25)
  at Object.<anonymous> (/Users/xxxx/IOTA-Balance-Finder/main.js:134:1)
  at Module._compile (module.js:662:30)
  at Object.Module._extensions..js (module.js:673:10)
  at Module.load (module.js:575:32)
  at tryModuleLoad (module.js:515:12)
  at Function.Module._load (module.js:507:3)


Any ideas what might be causing this problem? I'm a bit stumped to be honest! Obviously "d" is undefined thus has no length, but I'm not sure what it is supposed to be... 
Thanks for your help.

Im waiting for the same answer bro, i got the same situation over here and i hope it would be solved soon. 

@rajivshah   @johnprime  
Please guys if you have any solution to this, i think even more people getting the same problem, we would be happy if you help us.
Thanks in advance!
Winston
Winston
Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)Forum Admin (33K reputation)
Group: Administrators
Posts: 3.6K, Visits: 6.8K
xprmnt92 - 5 Mar 2018
xprmnt92 - 1 Mar 2018
magsrevs - 27 Feb 2018
Rajiv Shah - 21 Feb 2018
@piewies hi! If you run
git checkout add9ae25916048785198859cbf06d559cbadcd15
and then 
npm install

node main.js SEED p


It should work. The pre-transitioned address generation is supported in a previous commit but I removed it in the latest one

Hi Rajiv,

I'm trying to get the balance finder tool to work. I've tried a few versions - I need to track down an address from before October - including the checkout you recommend above, but I keep coming up against this error:

Address Search Type: Pre-Transitioned
Checking your balance...Press i at any time to stop...
Checking for new addresses
/Users/xxxx/IOTA-Balance-Finder/main.js:51
for (var i = 0; i < d.length; i++) {
        ^

TypeError: Cannot read property 'length' of undefined
  at getNewAddressCallback (/Users/xxxx/IOTA-Balance-Finder/main.js:51:25)
  at /Users/xxxx/IOTA-Balance-Finder/main.js:129:7
  at m.getNewAddress (./pre-trans-generator/js/iota.js:1:6034)
  at check (/Users/xxxx/IOTA-Balance-Finder/main.js:124:25)
  at Object.<anonymous> (/Users/xxxx/IOTA-Balance-Finder/main.js:134:1)
  at Module._compile (module.js:662:30)
  at Object.Module._extensions..js (module.js:673:10)
  at Module.load (module.js:575:32)
  at tryModuleLoad (module.js:515:12)
  at Function.Module._load (module.js:507:3)


Any ideas what might be causing this problem? I'm a bit stumped to be honest! Obviously "d" is undefined thus has no length, but I'm not sure what it is supposed to be... 
Thanks for your help.

Im waiting for the same answer bro, i got the same situation over here and i hope it would be solved soon. 

@rajivshah   @johnprime  
Please guys if you have any solution to this, i think even more people getting the same problem, we would be happy if you help us.
Thanks in advance!

@xprmnt92 
I pinged Rajiv on discord. Hopefully he can swing by here within the next few days.

GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...




Reading This Topic

Login

Explore
Messages
Mentions
Search