RobinGröble
|
|
Group: Forum Members
Posts: 43,
Visits: 1
|
+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)?
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)? I think that there is no problem that you had generate addresses if you didn´t use them. But anyway, just to be sure, do it again. But save all your new seeds, because you have to check all of them when the funds return to users. You will have your funds back in one of the new seeds. Just in one. The others will be ignored.
|
|
|
RobinGröble
|
|
Group: Forum Members
Posts: 43,
Visits: 1
|
+x+x+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)? I think that there is no problem that you had generate addresses if you didn´t use them. But anyway, just to be sure, do it again. But save all your new seeds, because you have to check all of them when the funds return to users. You will have your funds back in one of the new seeds. Just in one. The others will be ignored. Okay. I'll do that. But when will the funds return to users? Thank you for your help
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+x+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)? I think that there is no problem that you had generate addresses if you didn´t use them. But anyway, just to be sure, do it again. But save all your new seeds, because you have to check all of them when the funds return to users. You will have your funds back in one of the new seeds. Just in one. The others will be ignored. Okay. I'll do that. But when will the funds return to users? Thank you for your help No problem Robin. It will start this week. You can check the update on this post or in the new announcement pinned in the home page.
|
|
|
eidkdudphelloiotaxqvtqvlpl...
|
|
Group: Forum Members
Posts: 7,
Visits: 1
|
+x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support!
|
|
|
eltuga
|
|
Group: Forum Members
Posts: 7,
Visits: 0
|
+x How did you get that list? How can I see my wallet status?
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now.
|
|
|
Arek Budnik
|
|
Group: Forum Members
Posts: 35,
Visits: 136
|
Phase 1 must be with wallet 2.5.2, or can it be 2.5.4?
|
|
|
RobinGröble
|
|
Group: Forum Members
Posts: 43,
Visits: 1
|
+x+x+x+x+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)? I think that there is no problem that you had generate addresses if you didn´t use them. But anyway, just to be sure, do it again. But save all your new seeds, because you have to check all of them when the funds return to users. You will have your funds back in one of the new seeds. Just in one. The others will be ignored. Okay. I'll do that. But when will the funds return to users? Thank you for your help No problem Robin. It will start this week. You can check the update on this post or in the new announcement pinned in the home page. Hello, I did the Reclaim Tool thing again. The problem is, that the proof transaction is pending since more than 1 hour.. Is that normal? Thank you
|
|
|
F.Guerrero
|
|
Group: Forum Members
Posts: 39,
Visits: 26
|
+x+x+x+x+x@eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now. Goodnight: Finish my claim process with the 2.5.4 wallet, the only thing that worries me is that I have not received any message telling me "that the Iotas will be transferred to this address" as it has been commented here. The only thing that I noticed at the top is a green window that said "link completed" Reveal transaction is pending --- Transaction hash and a direction. Only that. Do i have to do something else?? or so it's fine. By the way I made the claim process without logging in as I read here. Thank you.
|
|
|
BeckyB
|
|
Group: Forum Members
Posts: 2,
Visits: 0
|
This really has been a long, frustrating ordeal for all of us earlier IOTA supporters caught in this mess. Going months with no access to our funds does not reflect well on this project. I hope the Foundation is going to do something to make it up to us? This is the worst experience I had with a CC in the last 5 years!!
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+xPhase 1 must be with wallet 2.5.2, or can it be 2.5.4? @Arek99Phase 1 and phase 2 can be both (and must be) made in wallet 2.5.4.
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+x+x+x+x+xThis is so confusing.. I created many new Addresses with my two new seeds +x+x+x+x @eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. This is so confusing.. I created many new Addresses with my two new seeds.. The wallet still shows 0 Iota. Read the guide I gave above in one of the replies (it´s in an attachement). You should not generate addresses if you used the reclaim tool. Please check my guide. You need to wait for the recover funds. Okay.. so what should I do now? Should I start the Reclaim Tool again, and create a 3rd Seed (without creating any new Addresses with that new Seed)? I think that there is no problem that you had generate addresses if you didn´t use them. But anyway, just to be sure, do it again. But save all your new seeds, because you have to check all of them when the funds return to users. You will have your funds back in one of the new seeds. Just in one. The others will be ignored. Okay. I'll do that. But when will the funds return to users? Thank you for your help No problem Robin. It will start this week. You can check the update on this post or in the new announcement pinned in the home page. Hello, I did the Reclaim Tool thing again. The problem is, that the proof transaction is pending since more than 1 hour.. Is that normal? Thank you Hello @RobinGröble Unfortunatly there have been a lot of users that experience the pending status for a long time (had experience 1 hour already). You can always close the wallet, open again, change host, save, and iniate the process again. It takes time.
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+x+x+x+x@eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now. Goodnight: Finish my claim process with the 2.5.4 wallet, the only thing that worries me is that I have not received any message telling me "that the Iotas will be transferred to this address" as it has been commented here. The only thing that I noticed at the top is a green window that said "link completed" Reveal transaction is pending --- Transaction hash and a direction. Only that. Do i have to do something else?? or so it's fine. By the way I made the claim process without logging in as I read here. Thank you. Hello @F.Guerrero You must receive an address with the info that your iotas will be transfered to that address or else you won´t have your funds back. After please see my guide attached to one of the reply to this post. In the last step, after the reveal transaction confirmed, you must click, SUBMIT SEED and wait for this last step to be confirmed.
|
|
|
F.Guerrero
|
|
Group: Forum Members
Posts: 39,
Visits: 26
|
+x+x+x+x+x+x+x@eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now. Goodnight: Finish my claim process with the 2.5.4 wallet, the only thing that worries me is that I have not received any message telling me "that the Iotas will be transferred to this address" as it has been commented here. The only thing that I noticed at the top is a green window that said "link completed" Reveal transaction is pending --- Transaction hash and a direction. Only that. Do i have to do something else?? or so it's fine. By the way I made the claim process without logging in as I read here. Thank you. Hello @F.Guerrero You must receive an address with the info that your iotas will be transfered to that address or else you won´t have your funds back. After please see my guide attached to one of the reply to this post. In the last step, after the reveal transaction confirmed, you must click, SUBMIT SEED and wait for this last step to be confirmed. I return to repeat the process until I get that message ??? Thank you.
|
|
|
F.Guerrero
|
|
Group: Forum Members
Posts: 39,
Visits: 26
|
+x+x+x+x+x+x+x+x@eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now. Goodnight: Finish my claim process with the 2.5.4 wallet, the only thing that worries me is that I have not received any message telling me "that the Iotas will be transferred to this address" as it has been commented here. The only thing that I noticed at the top is a green window that said "link completed" Reveal transaction is pending --- Transaction hash and a direction. Only that. Do i have to do something else?? or so it's fine. By the way I made the claim process without logging in as I read here. Thank you. Hello @F.Guerrero You must receive an address with the info that your iotas will be transfered to that address or else you won´t have your funds back. After please see my guide attached to one of the reply to this post. In the last step, after the reveal transaction confirmed, you must click, SUBMIT SEED and wait for this last step to be confirmed. I return to repeat the process until I get that message ??? Thank you. At this point I arrive, after giving SUBMIT SEED the link and it tells me this and above it a green window is displayed that says: "Linkage completed" Reveal transaction is pending Transaction hash: EEBJHZ9LTR9VAK ..... To complete the claim process submit your old seed. Please wait for the confirmation of the reveal transaction and make use of the reattach button if it is pending for too long. I am doing something wrong?? The first phase of recovery was made with the wallet prior to 2.5.4 and now I'm back to claim to finish phase 2 with 2.5.4.
|
|
|
Taylor Allen
|
|
Group: Forum Members
Posts: 207,
Visits: 995
|
+x+x+x+x+x+x+x+x+x@eidkdudphelloiotaxqvtqvlplwruoYou must use the reclaim without login the wallet 2.5.4. The main problem right now is confirm the phases. That can be achieved changing host, chack if MWM is at 14 and change to ccurl in the curl implementation. Do this settings before begin the reclaim process. At this moment you can try with the hosts http://88.198.230.98:14265 or http://176.9.3.149:14265 But again, the reclaim tool must be used without login in the wallet. You are certain that you finished the reclaim correctly if you get an address that is going to be used to get your funds back. Please read this guide about the reclaim process. @Taylor Allen: THANKS! I have reached "Proof transaction confirmed" and an address has been shown. One more thing regarding the new address: The guide in section "Further infos" tells "The new seed is used to generate an address (at index: 0), to which reclaimed tokens will be sent." I generated some addresses from the new seed using the "IOTA Address Generator", keyIndex=0 and all security levels, but none match the new address given in the Reclaim-Tool. Then, in the Wallet (2.5.4) I created new addresses using the new seed, still the addresses do not match. I am sure, I used the correct new seed. Again many thanks, for the important hints ("not logging in!") Please don´t create further addresses using the new seed. Don´t use the new seed. If you can see the new address (generate by the reclaim tool) in one of the explorers of the tangle everything is correct. Be sure you have the correct new seed. +x+x+x+x@Taylor Allen Can you please confirm, that the address shown in the Reclaim-Tool at "Any reclaimed tokens will be sent to your address shown below..." doesn't need to match with with any of the addresses generated in "IOTA Address Generator" using the same new Seed? Are you talking about this tool https://github.com/domschiener/iota-address-generator ? Yes This tool is not updated. It´s previous to 8th August, You can try with any other seed and you can check that to be sure. Ahhh, yes! got it. I logged in using the Desktop Wallet 2.5.4 and to my surprise I do not see any of the created two receive addresses before. Instead, I am really happy to see a matching receiving address (same as the one shown in the Reclaim Tool)!! Now, just waiting for the fund coming in ;-) Thanks @Taylor Allen for your awesome support! @eidkdudphelloiotaxqvtqvlplwruo No problem. I am glad everything is ok now. Goodnight: Finish my claim process with the 2.5.4 wallet, the only thing that worries me is that I have not received any message telling me "that the Iotas will be transferred to this address" as it has been commented here. The only thing that I noticed at the top is a green window that said "link completed" Reveal transaction is pending --- Transaction hash and a direction. Only that. Do i have to do something else?? or so it's fine. By the way I made the claim process without logging in as I read here. Thank you. Hello @F.Guerrero You must receive an address with the info that your iotas will be transfered to that address or else you won´t have your funds back. After please see my guide attached to one of the reply to this post. In the last step, after the reveal transaction confirmed, you must click, SUBMIT SEED and wait for this last step to be confirmed. I return to repeat the process until I get that message ??? Thank you. At this point I arrive, after giving SUBMIT SEED the link and it tells me this and above it a green window is displayed that says: "Linkage completed" Reveal transaction is pending Transaction hash: EEBJHZ9LTR9VAK ..... To complete the claim process submit your old seed. Please wait for the confirmation of the reveal transaction and make use of the reattach button if it is pending for too long. I am doing something wrong?? The first phase of recovery was made with the wallet prior to 2.5.4 and now I'm back to claim to finish phase 2 with 2.5.4. No, you are doing the right procedure. But it takes a lot of time.
|
|
|
mavis43
|
|
Group: Forum Members
Posts: 9,
Visits: 4
|
@Taylor Allen I've got an adress, do I attach it or not, because when I search it in the tangle explorer I got an http 500 error.
|
|
|
Winston
|
|
Group: Administrators
Posts: 3.6K,
Visits: 6.8K
|
+x@Taylor Allen I've got an adress, do I attach it or not, because when I search it in the tangle explorer I got an http 500 error. @mavis43Search for your address (only search for the FIRST half of your address) in this database:
|
|
|
mavis43
|
|
Group: Forum Members
Posts: 9,
Visits: 4
|
@WinstonI'v attached it and found it, the whole address, but what database do you mean?
|
|
|